BijoDam Carbide Graver for Metalworking S45C Handle, Boat Bottom Mirror Finish SPL ▲ Hairline Engraving 0.6mm Curved, 1 pc
15.51 USD(tax included)
／27.92 USD (Excluding tax)
Sales unit: 1 piece
Application number: / Manufacturer: / Model number: m30278380837 / JAN code: / AS ONE / NAVIS Product number:
| Application number | |
|---|---|
| Manufacturer | |
| Model number | m30278380837 |
| JAN code | |
| Sales unit | 1 piece |
| Price | 15.51 USD (tax included) / 27.92 USD (Excluding tax) |
*Additional shipping fees will be charged for this product in Okinawa Prefecture, remote islands, some other areas, and mountain areas. Please note that we may not be able to deliver depending on the region. If we are unable to deliver your order after placing your order, Askul will contact you.
Please note the following points as this item is directly shipped.
- Additional shipping fees will be charged for this product in Okinawa Prefecture, remote islands, some other areas, and mountain areas. Please note that we may not be able to deliver depending on the region. If we are unable to deliver your order after placing your order, Askul will contact you.
- This product may not come with a delivery note issued by Askul. Customers who wish to receive a delivery note issued by Askul can print it out as a PDF file from the usage history on this site after receiving the product.
- It is not delivered in Askul cardboard or a bag.
- We cannot accept changes, cancellations, returns, or exchanges after the order has been placed due to the customer's convenience.
- If we discover after placing an order that the product cannot be delivered, we may cancel your order.
- If it becomes clear after placing your order that the item is temporarily out of stock, it will be delivered as soon as it becomes available.
This image is a representative image. Please check the specifications for details.
Stock: Slightly
Direct delivery product
Shipping charges for products from this shipping source will be borne by us.
58 USD (tax included)
/ 63.8 USD (Excluding tax)
Product details
Print product information
| Product features | Category Metalworking & Jewelry-Making Tools Condition New/unused Shipping Included in price (by seller) From Yamanashi |
||
|---|---|---|---|
| Manufacturer name | - | Brand name | - |
| remarks | [About returns] We cannot accept returns due to customer's convenience. | ||
| Product details |
Our current handle variations include SUS304 stainless steel, carbon steel (red chisel imitation), SS400 steel, and brass. Since there are no exact matches for width and thickness, we've simply ordered them by material hardness. However, handle shape also affects performance, in addition to width and thickness. We had initially given up on S45C, but upon further consideration, the fine engraving on red and blue chisels is done on a surface, which is essentially a square cross-section bar. I believe the preconception that carbide chisels have flat steel handles also got in the way. Among these four handle types, the red chisel imitation has an intermediate hardness. Furthermore, the chisel itself comes in different sizes and lengths (No. 2 and No. 3) as handle materials. Considering the characteristics of different chisel thicknesses and shapes, the red chisel imitation is the most standard and easiest to engrave with. The new S45C will be our fifth type, and it will be made of the same carbon steel as the red chisel. The S45C handle has a width and thickness of 4mm, a handle length of 73mm, and a 25mm carbide tip brazed on, making the total length approximately 93mm, falling between the SUS handle and the red chisel imitation No. 2. While the material is inexpensive, the processing of the handle makes it more costly. It is likely to be used as a handle material primarily for fine engraving due to its flat surface. Regarding carbide chisels, we sometimes hear opinions that older chisels were better. When I was a beginner and even as a professional, all chisel handles were made of steel. The opinion that older chisels were better is likely due to the steel handle material and the different handle shapes from that era. Image 3 shows a comparison with the red chisel imitation No. 2. The red chisel imitation does not include the scale. We have processed it to be closer to the traditional chisel shapes like the blue and red chisels. In this way, we have reduced the step at the brazed joint and rounded the striking point. Since the brazed joint and striking point are tapered, they are less likely to shift even when heat shrink tubing is applied. Like steel, it will rust, although not as much as SS400. Please understand that the finish is rough as it is primarily shaped with a grinder. Also, please refer to our standard listings for SUS handles. Trial engraving video is below: https://youtu.be/Bt54HyCQKZE We will respond to initial defects such as differences in size or tip shape, but damage such as chipping or breakage after use cannot be replaced. We can also adjust the width and angle of the tip during re-sharpening. Includes shipping via Mercari便 Nekoposu. http://bijodam.com BijoDam Studio, Representative: Yutaka Ota Click here for the manufacturer's site 
Easy to find furniture and interiors! Click here for Askul's general furniture TOP page.
Consultation on layout, various construction works, and delivery dates! Click here for the ASKUL office creation service.
|
||
※Disclaimer
In this service, we strive to display the latest product information on the site, but product standards and specifications (capacity, packaging, raw materials, country of origin, etc.) may change due to manufacturer circumstances. For this reason, the product information displayed on the site may differ from the actual product you receive, so please be sure to check the product label and precautions of the product you receive before use. If you require further product information, please contact the manufacturer. Also, the notation "set" in the sales unit does not guarantee delivery in a box. Thank you for your understanding.
Best Selling Ranking
For Shoru-sama Only
52.80 USD (tax included) 95.04 USD
Jewelry Making K10 Gold Solder Approx. 0.2g Ishifuku Jewelry Parts
26.39 USD (tax included) 47.50 USD
Engraving Tool Set for Ring Making - Complete Set (Jeweler's Saw, Ring Mandrel, Files, etc.)
72.60 USD (tax included) 130.68 USD
Abrasive compounds, assorted, set of 6
11.22 USD (tax included) 20.20 USD
Heart Carabiner - 40 JPY each
10.00 USD (tax included) 18.00 USD
Printing Lead 8kg Lead Metal Jig
52.80 USD (tax included) 95.04 USD
30 Pieces / 4.5 x 4 mm Wire Protector Loop U-Shaped Bracket
10.00 USD (tax included) 18.00 USD
Set of 2 Zipper Pulls, Size S, Silver, Z176
10.00 USD (tax included) 18.00 USD
Customer reviews
There are no reviews posted. We look forward to hearing your review comments.
Features related to this product
TV/Audio/Camera categories
Hobby/Musical Instruments/Art Categories
Home appliances and air conditioning categories
The product has been added to your cart
- Total items
-
piece
- Total Amount
-
(tax included)